Follow focus à friction et engrenage avec Riser rail

Ce produit inclus un Follow focus à friction, une paire de Rod 15 mm et un Riser de caméra.Le follow focus comprend des interfaces d'objectifs à friction et à engrenage, un disque de marquage amovible et une base de Rod bloc de 15 mm fixée par serrage. Un seul levier verrouille la base en demi-lune sur les Rod blocs, éliminant ainsi le besoin de glisser d'autres accessoires pour monter le follow focus. Un autre levier vous permet d'ajuster et de verrouiller le follow focus horizontalement pour s'adapter à différents diamètres d'objectif. Le follow focus peut être utilisé de chaque côté de l'objectif.

Le système riser/Rod sert à la fois à élever la caméra de 2" pour mieux accommoder le follow focus et d'autres accessoires. Le Rod bloc permet de monter la paire de Rod de 8" 15 mm. Le support de Rod bloc peut être relevé jusqu'à 1-3/8" à l'aide d'une clé hexagonale de 4 mm (non fournie). Une fente de montage de caméra de 4" vous permet d'ajuster la position de votre caméra sur l'élévateur. De multiples trous filetés 1/4"-20 et 3/8"-16 dans la base de la colonne montante permettent le montage sur diverses plaques de trépied et autres supports.

Follow focus friction & gear clic (FFCLIC)

The SHAPE Friction & Gear Follow-Focus Clic with Adjustable Marker is made of lightweight anodized CNC aluminum for strength and durability. It is designed to attach onto standard 15 mm rods of shoulder support rigs and other rigs. It attaches onto them via a clamp system, with simplicity. You would sit the Clic on top of the rods, and then slide and close a SHAPE-patented lever clamp underneath the rods, and the lever locks and holds the Clic securely on the rods.

The Clic’s focus mechanism also works with a clamp system, which when unlocked loosens the focus mechanism and allows it to be moved horizontally. It moves so to adjust itself closer to the lens. As it moves, its main feature — the focus disk — moves with it, and the focus disk is what reaches the lens. The focus disk can either be a friction wheel or a gear wheel. Both are present in this package and replacing one with the other is accomplished with the help of the included Allen wrench. The friction wheel has a rubber outer surface that would press up against the lens, keep firm contact with it, and ensure accurate and slip-free focusing. The friction wheel would serve well for most lenses and is made of high-quality rubber that in cold temperatures won’t get too cold to lose its grip. The gear wheel would accommodate those lenses that specifically have teeth on their focusing rings, and it would do so without any ring gears, by pressing its 0.8 pitch gears into the teeth.

The focus mechanism can be used on either the left or the right side of the lens, depending on the direction you place the Clic onto the rods in. And the focus disk itself can be used either in front of the focus mechanism or behind it, so to accommodate a wider variety of lens lengths. To move the disk to the rear, you would first just unscrew two screws from the gearbox. Once the screws are off, the focus disk can just be flipped over for use with longer lens constructions. The white mark disk at the right of the red knob is made of highly resistant Delrin thermoplastic. It can be written on with non-permanent markers to mark up focus measurements for various predetermined shots, and it is interchangeable and thereby many predetermined measurements can be kept ready at your side. Additionally, a slide-adjustable marker made of aluminum is included to be attached beside the mark disk and to be moved and tightened into positions along the disk.

Paparazzi riser 15 mm rod system (ROD2)

Use the SHAPE Paparazzi Riser/15 mm Rod System as a base to attach accessories to your DSLR or small camcorder. This system displaces the weight of accessories from the camera to the rods/riser. The Paparazzi riser adds 2″ to the camera height while its mounting-screw slot allows for up to 4″ of front-to-back adjustment. The 15 mm rod system offers thumbscrew-locking 8″ rods with Allen key vertical adjustment (up to 1.375″). This riser/rod system can work with various on-camera accessories such as a lens support, matte box, lens adapter, or follow focus.

The Paparazzi Riser from SHAPE is a 2″ fixed-height camera riser offering either parallel or perpendicular camera support. The riser’s top surface includes a 4″ sliding screw slot that enables the camera to be adjusted front-to-back or side-to-side, depending on the riser’s orientation. This Paparazzi Riser features several 1/4″-20 and 3/8″-16 threaded holes. The hole located on the base is used to attach the riser to a camera support, while the front and rear holes can be used to attach various accessories such as a sliding rod block.

Pair of rod 15 mm female-female rod (8 in) (2ROD15FF8)

The SHAPE pair of 15 mm 8″ female-female rods are anodized aluminum rods with 1/2″-13 threaded female extremities. The rods are 8″ (203mm) long and have a diameter of 0.59″ (15 mm). It is compatible with 15 mm 4″ or 6″ male-female rods, rod bloc, and sliding rod Bloc.

(1) Follow Focus Friction & Gear Clic System Compatible With 15 mm Rods (FFCLIC), (1) Paparazzi riser 15 mm rod system with (1 pair) 15 mm 8" female-female rods (ROD2)