Dovetail 12" et bridge plate 19 mm studio Arri standard REF DPK19

Utilisez la plaque de pont en aluminium ARRI Standard Studio et la plaque à queue d'aronde de 12 ' avec deux tiges coniques de 12' 19 mm pour monter et démonter facilement votre appareil photo et ses accessoires. Les tiges décalées de studio sont espacées de 104 mm. Une vis 1/4 '-20 et une vis 3/8' -16 permettent de monter une variété de caméras, et la plaque se verrouille et glisse de haut en bas sur les tiges à l'aide d'un levier de verrouillage.

La plaque de pont de studio est fixée par des vis 1/4 '-20 et 3/8' -16 à une plaque à queue d'aronde standard ARRI en aluminium revêtue de Téflon. La plaque de 12 'a une queue d'aronde ARRI conique qui vous permet d'ajuster votre plaque de pont en glissant facilement d'avant en arrière. Une vis de butée à une extrémité et un loquet de sécurité à l'autre empêchent la plaque de pont de glisser accidentellement hors de la plaque. Il y en a douze 1 / 4 '-20 et cinq filetages 3/8' -16 au centre de la plaque pour le montage.

Un tournevis plat est fourni pour serrer les vis de montage, et il peut être fixé à la plaque de pont avec un aimant.

SHAPE lightweight Arri standard 12 inches dovetail plate (DP12A)

Use this ARRI Standard 12″ Dovetail Plate from SHAPE when balancing front- or back-heavy camera loads. The studio bridgeplates 19 mm or 15 mm Arri standard (DPK19, DPK15) can easily slide onto the lightweight ARRI standard 12″ dovetail plate for additional leverage and mounting options. Both the aluminum, Teflon-coated design and tapered ARRI dovetail configuration allow your mounted equipment to slide back and forth easily. A stopper screw on one end and a safety latch on the other prevent your equipment from accidentally sliding off the plate. There are twelve 1/4″-20 and five 3/8″-16 threads down the center of the plate for mounting.

SHAPE Bridge plate 19 mm studio Arri standard (DP19S)

The studio bridgeplate can easily slide onto the lightweight ARRI standard 12″ dovetail plate (DP12A) for additional leverage and mounting options. It is made of CNC aluminum and it is also designed with locking levers to secure the bridgeplate to the dovetail. The ARRI Standard Studio Bridgeplate comes with two tapered, 12″ 19 mm rods (19TUBE12) to easily mount and dismount your camera and accessories. The studio-offset rods are spaced 104 mm apart. One 1/4″-20 and one 3/8″-16 screw allow mounting a variety of cameras, and the plate locks and slides up and down the rods with the use of a locking lever. A flat screwdriver is provided to tighten the mounting screws, and it can be attached to the bridgeplate with a magnet.

19 mm 12" rods (19TUBE12)

This pair of SHAPE 19 mm Aluminum Rods (12″) connect into your camera rig, extend it, and let you add various SHAPE and third-party accessories compatible with 19 mm rods. With these two rods and with a few fundamental accessories, you can most certainly even begin building your own rig from scratch.

The rods are each 19 mm in diameter, 12 inches long, hollow, non-threaded, and made of reliable aluminum coated with a clear finish.

(1) ARRI STANDARD 19MM STUDIO BRIDGE PLATE, (1) ARRI STANDARD 12" DOVETAIL PLATE, (1) PAIR OF 19 MM RODS (12'')